For DEFAULT IP is 192.168.22.1

DEFAULT Username:voip; Password:1234

================================

>> Routing Setup > Voip Call Out

Setting Voip Call OUT

KETERANGAN Voip Call Out :

  • Delete Index yang ada, dan
  • Sisakan 1 Index dan isikan bagian Destination dengan “rs1”
  • Klik Modify.

:::::

>> Routing Setup > Voip Call In

Setting Voip Call IN

Baca entri selengkapnya »

To enable, the command is :

> switch set port lan6 qos
> switch set port lan6 defaultpriority 6
> switch set port lan6 dscp

To View the result, type command :
> switch show port lan6

and the result is :

Baca entri selengkapnya »

To set jitterdelay in iMG, the following commands are used :

voip ep analogue set tel1 jitterdelay 200
voip ep analogue set tel2 jitterdelay 200

By setting this jitterdelay, the iMG will buffer 200millisecond before it transmits to the network.

The default jitterdelay is 130.

©.dat-2010

Berikut konfigurasi standard untuk IMG yang menggunakan semua port interfacenya.
Dalam kasus ini digunakan 4 jenis vlan untuk 6 port lan, dan 2 port analog.

vlan add IMGmgmt vid 101
vlan add Internet vid 1101
vlan add Iptel vid 2001
vlan add Video vid 3001

vlan add IMGmgmt port wan frame tagged
vlan add Internet port wan frame tagged
vlan add Iptel port wan frame tagged
vlan add Video port wan frame tagged

vlan add Internet port lan1 frame untagged

vlan add Video port lan2 frame untagged
vlan add Video port lan3 frame untagged
vlan add Iptel port lan4 frame untagged
vlan add Iptel port lan5 frame untagged
vlan add Iptel port lan6 frame untagged

ip set interface ip0 dhcp disabled
dhcpclient update

ethernet add transport IMGmgmt
ip add interface ip1 10.xxx.x.xx 255.255.0.0
ip attach ip1 IMGmgmt

ip add defaultroute gateway 10.xxx.x.x

voip sip protocol enable
voip ep analogue create tel1 type al-fxs-del physical-port tel1

voip ep analogue create tel2 type al-fxs-del physical-port tel2
voip sip protocol set netinterface ip1

voip sip locationserver create fxsip contact 10.XXX.X.XX
voip sip proxyserver create fxsip contact 10.XXX.X.XX
voip ep analogue set tel1 country usa
voip ep analogue set tel2 country usa

=====================================================================
voip sip user create 1234 address 1234 authentication 1234:password
voip sip user add 1234 port tel1

voip sip user create 5678 address 5678 authentication 5678:secret
voip sip user add 5678 port tel2
=====================================================================

system config create configname.cfg
system config set configname.cfg

©.dat-2010